Is your home front still plain plaster?
This simple before & after image shows a big change with small decisions.

  • Left: basic plaster
  • Right: HPLMaker horizontal HPL panels + white paint

Same angle. Same light. The right side feels modern—straight lines, tidy gaps, and a durable finish for Indian weather.

Why this makeover works

  • Instant modern look: Horizontal panels draw the eye wide and make the front look neat.
  • Pairs well with white paint: Clean contrast; bright and timeless.
  • Built for outdoors: HPL resists sun, rain, and dust better than plain plaster.
  • Low upkeep: A quick wipe is enough.
  • Color stays consistent: You don’t repaint every season.

Tip: One rich HPL tone + white paint = premium feel without visual noise.

What is HPL cladding?

HPL (High-Pressure Laminate) exterior sheets are strong, weather-ready panels for building facades. With HPLMaker, you get true-to-life textures, accurate colors, and clean horizontal joints that look professional.

How we turn plaster into a premium front

  1. Check & measure: We inspect wall condition and plan joint lines.
  2. Subframe: Aluminum/GI frame aligned for horizontal panel layout.
  3. Panel plan: Joint gaps, trims, and window reveals set first.
  4. Cut & finish edges: Crisp cuts for straight lines.
  5. Fix panels: Correct fasteners, ventilation gaps.
  6. Paint pairing: Adjacent volumes in clean white paint.
  7. Final check: Seal trims where needed and wipe down.

Pro tip: Align panel joints with your gate pattern or window bands to make the whole elevation feel connected.

Easy design ideas

  • Charcoal + white: premium and bold
  • Walnut wood look + white: warm but modern
  • Cement grey + white: minimal, urban
  • Sand beige + white: sun-friendly, soft

For night: add simple uplights to graze the HPL surface—shadows make joints pop.

Care & cleaning (2-minute routine)

  • Monthly: quick water rinse for dust
  • Quarterly: mild soap + microfiber cloth
  • After monsoon: wipe corners/trims; avoid harsh chemicals
  • No abrasive pads or high-pressure jets needed

Before vs After: quick summary

Before (Plaster)

  • Cracks/peeling over time
  • Frequent repainting
  • Flat look

After (HPLMaker + White Paint)

  • Clean, modern lines
  • Color-stable, weather-ready
  • Low maintenance, premium finish

FAQs

1) Can I install HPL over existing plaster?
Usually yes. We add a ventilated subframe and fix panels. We’ll check your wall first.

2) How long does it take?
A typical home front can finish in a few days after materials and subframe are ready.

3) Will it handle heat and rain?
Yes. Exterior HPL is designed for UV, heat, humidity, and rain.

4) How do I clean it?
Water + mild soap + microfiber cloth.

5) What colors are available?
Charcoal, wood tones, cement, beige, and more. We’ll help match with white paint.

6) What does it cost?
It depends on area, subframe type, and texture. Share your measurements for an exact quote.

Call to action

Want a before/after mockup of your home front?
Send a clear photo and your favorite HPL tone. We’ll suggest a horizontal HPL + white paint combo and a quick estimate.

HPLMaker — simple, modern, weather-ready.
Website: hplmaker.com • Bengaluru branch: +91-8982490236