By HPLMaker Team, IndoreUpdated November 20266 min read
Design Ideas

In a row of identical homes, every unit starts with the same front. A few well-placed HPL panels can give yours its own character, while still respecting the rhythm of the row and any society guidelines.

Row houses, townhouses and twin bungalows are popular in gated communities across India. They offer independent-house living on a smaller footprint. The catch is that builders usually give every unit the same front, so it’s hard to tell your home from the one next door.

Upgrading the elevation with exterior HPL is one of the easiest ways to personalise a row house, as long as it’s done with respect for the row and the society’s rules.

Quick answer

To make a row house or twin bungalow stand out, upgrade two or three high-impact spots with exterior HPL: the balcony parapet, the entrance wall and the gate. Keep the overall lines of the row intact, choose finishes that complement neighbours, and check society or builder guidelines before work starts.

Key takeaways
  • Check society or builder guidelines first.
  • Upgrade high-impact spots: balcony, entrance, gate.
  • Respect the row’s lines and heights.
  • For twin bungalows, coordinate with your neighbour where possible.
  • Two finishes are enough on a narrow row-house front.

Start With the Rules

Many gated communities have facade guidelines to keep the row looking consistent. Before planning, check:

  • Whether external changes need approval.
  • Any restrictions on colours or materials.
  • Rules about the gate, compound wall and front setback.

A short conversation with the association early saves trouble later.

3
High-impact spots to upgrade
25
Year HPLMaker warranty
32
Sq ft covered by one 8 × 4 ft sheet

6 Ideas for Row Houses

1. Wooden balcony parapet

The simplest, most visible upgrade. A wooden-finish parapet with a slim railing changes the whole front. See balcony cladding ideas.

2. Stone entrance wall

A stone-finish wall around the door makes the entry feel solid and personal.

3. Matching gate

On a narrow plot, the gate is a large part of the front. A wooden-finish gate matching the balcony ties it together. See modern HPL gate designs.

4. Window box frame

A charcoal frame around the main first-floor window adds depth without changing the row’s lines.

5. Porch ceiling

A wooden-finish porch ceiling with warm lights is a subtle upgrade visitors notice. See outdoor ceiling cladding.

6. Name-plate wall

A small HPL panel for the house name and number personalises the front.

Twin Bungalows: Mirror or Match?

Twin bungalows share a central wall, so the two halves are seen together. You have two options:

Approach How it looks Best when
Matching Both halves clad in the same finishes Neighbours agree; symmetrical design
Complementary Same layout, different but related finishes Each owner wants their own look
Single side Only one half upgraded Neighbour isn’t ready; keep it subtle

Neighbour tip: If you’re upgrading only your half of a twin bungalow, choose finishes that sit comfortably next to the neighbour’s plain side, like mid-tone wood or light stone, rather than very bold colours.

Planning Steps

  1. Check society guidelines and get any approvals.
  2. Pick two or three upgrade spots.
  3. Choose finishes that complement the row.
  4. Measure and calculate with the HPL sheet calculator.
  5. Coordinate work timing with neighbours for shared walls or access.

Mistakes to Avoid

Ignoring society rules. It can lead to disputes or forced removal.

Breaking the row’s lines. Changing heights or adding big projections can look out of place.

Overdoing it. On a narrow front, too many finishes look crowded.

Forgetting maintenance access. Shared walls and narrow gaps need planning for future cleaning.

For colour help, read how to choose the right HPL shade.

Small Upgrades, Big Difference

You don’t need to clad the whole front of a row house. A typical high-impact package is:

  • Balcony parapet in a wooden finish.
  • Entrance wall in a stone finish.
  • Gate in matching wood.
  • Porch ceiling with warm lights.

Together these use a modest number of 8 × 4 ft sheets but change how the house looks from the street completely.

Resale and Rental Value

In gated communities, buyers and tenants often compare identical units side by side. A unit with a well-finished, low-maintenance front stands out in listings and visits. HPL’s 25-year warranty and minimal upkeep are easy selling points.

Planning Around Neighbours

Row-house work often needs access through shared spaces or near a neighbour’s wall. Tell neighbours the dates in advance, agree where materials will be stored, and keep the work area clean each evening. Because HPL is fixed dry on a frame, the job is quick and creates far less dust and mess than tile or stone work, which keeps everyone on good terms.

Planning your wall? Find out how many 8 × 4 ft HPL sheets you need in 30 seconds.

Open HPL Sheet Calculator

Frequently Asked Questions

Can I change the elevation of my row house?

Usually yes, but many societies have facade guidelines. Check with your association or builder before making external changes.

Which parts of a row house should I upgrade first?

The balcony parapet, entrance wall and gate give the biggest visual change for the least material.

Should twin bungalows have matching elevations?

Matching looks balanced, but complementary finishes also work. If only one half is upgraded, choose subtle tones that sit well beside the neighbour.

Is HPL suitable for row houses?

Yes. It’s light, weather-resistant, needs little maintenance and can be used on small areas for a big visual effect.

What warranty does HPLMaker offer?

HPLMaker exterior HPL sheets come with a 25-year warranty.

Want your row house to stand out?

Get HPLMaker shade ideas and a quote for your row house or twin bungalow.

WhatsApp UsView Shade Card